| ybzoz38621 |
|
|
| |
| Joined: 06 Jul 2013 |
| Posts: 687 |
Read: 0 topics
Warns: 0/5
|
| Location: England |
|
|
 |
|
 |
|
Stucco has a long history as a building material, used extensively throughout the western world and the Middle East for exterior and interior wall construction. It was also used for decoration in both homes and great buildings such as cathedrals and mosques. Basically a mix of an aggregate (mainly sand), a binder such as lime or cement, and water, it can be smooth or textured and makes a weather resistant, [link widoczny dla zalogowanych] durable surface.
The original mix of lime, sand, and water has given way to ones that use cement as the main binder. [link widoczny dla zalogowanych] Lime is [link widoczny dla zalogowanych] still [link widoczny dla zalogowanych] used as an additive, as it allows the covering to breathe and helps seal small cracks. Newer forms may incorporate acrylics or glass fibers for added flexibility and durability. This surfacing may be applied directly over cinder block or brick and also used over wood frame for attractive and low maintenance exteriors. Inside, it can be painted or covered with wallpaper or used alone if an integral color is added to the mix at the factory.
To make stucco cling to underlying wood frame construction, lath made of [link widoczny dla zalogowanych] wood or a metal mesh is attached to the exterior before the base coat is applied. The material, which goes on wet, will bind to [link widoczny dla zalogowanych] the supporting structure as the first coat. Wooden framing is protected by asphalt treated felt or paper, which shields the wood from the moisture of the uncured plastering.
The three step process includes the first coat, followed after a drying period by a second coat called the brown layer , which provides a smooth surface for the final finish. This additional layer will also need to cure slowly for a period of a [link widoczny dla zalogowanych] week or more, not being [link widoczny dla zalogowanych] allowed to dry too quickly at first. The process of drying, or curing, goes on until all shrinking and the resultant cracking is done.
The final coat is then applied. Many of the finishes have the color integrated at the factory, which means that there is no need for painting either [link widoczny dla zalogowanych] at the time of installation or in the [link widoczny dla zalogowanych] future. If desired, the stucco may be painted with a cement based formula, which does not interfere with the vapor permeability of the stucco. It is important for both the stucco and the interior of the house that the finish not be a complete seal that will trap moisture in the construction materials.
As the surface dries, it becomes hard and brittle. Acrylic added to the mix makes the covering less likely to chip and crack. The siding can have an old world look, being very smooth, or [link widoczny dla zalogowanych] can be floated to allow the sand to show on the surface. It can also be sanded for an extra slick surface or troweled for the swirls and stippling [link widoczny dla zalogowanych] often seen on interior ceilings or home exteriors.
This material is water repellent, insect proof, and more durable than most exterior wall treatments. It bonds more thoroughly than plaster, and is easy to apply. It may be mixed on site with sand and lime or comes in a complete mix that only needs to be mixed with water to be ready to use. It is either applied by hand or sprayed on by machine. It holds better to concrete or cinder block than paint, and makes a concrete or cinder block structure much more attractive.
Stucco is a tine tested building material that has seen some modern improvements. Suitable for any kind of construction, it remains one of the most popular exterior finishes.
相关的主题文章：
[link widoczny dla zalogowanych]
[link widoczny dla zalogowanych]
[link widoczny dla zalogowanych] |
|
